S476 Task-Pro Series 76MM Turbocharger for Detroit and Cummins T-6 1.32A/R (ATID7696C-132)
AirTec Innovations Task-Pro Series turbos are designed, assembled and balanced at our location. This Task-Pro Series 76mm turbo is designed to be a replacement Turbo for the Detroit & Cummins Truck Engines, the estimated operating horsepower range is from 500-600HP, these results may vary. The Task-Pro Series turbos have the heavy Duty 360 thrust bearings and have the compressor inducer machined with a radius for optimum air flow, ATI Task-Pro Series turbos are designed to flow Air to obtain the good fuel economy as well as drivability & horsepower.
Specifications:
*76mm Cast compressor
*96MM turbine wheel
*HD 360 degree thrust bearing
*Twin hydrodynamic journal bearings
*T6 twin scroll 1.32 A/R non-waste gated turbine housing
*Supporting HP range from 500-600HP
| Weight | 47 lbs |
|---|---|
| Dimensions | 12 × 12 × 15 in |
Related Products
-
CAT C15 STEED SPEED MANIFOLD
Regular Price $1,600.00The best manifold you can buy for your C15. A beautifully crafted CNC billet steel masterpiece! Far superior performance than any other product. EGTs were 150 degrees lower than even the best aftermarket manifold while spooling the turbo faster with higher peak boost and 6 lbs less drive pressure. This manifold is one piece so will never leak and is easy on studs and gaskets. In normal service it shouldn’t need to be retorqued either. Expect long service life and the best fuel economy ever from this manifold. Comes with Turbo mounting Hardware (T6 Gasket & Bolt Hardware) WARRENTY –…
-
S410SX CAT C15 76MM Turbo Task-Pro Series (ATIC7696C-OEM-132)
Regular Price $1,895.00S410SX 76MM Turbocharger for CAT C15 3406B-E Models S430SX (ATIC7696C-OEM-132) Airtec Innovations Task-Pro turbos are designed assembled and balanced at our ATI turbo shop in Southeast Iowa. This turbo is designed to be a direct replacement 76mm for the C15 Cat 3406B-E 6NZ Models. The estimated operating horsepower range is from 500-600HP, although depending on how your truck is modified these results may vary. The ATI turbos have the heavy Duty 360 thrust bearings, H80 Larger diameter turbine shaft and have the compressor inducer machined with a radius for optimum air flow, ATI Task-Pro Series turbos are designed to flow…
-
ATI T4 EXHAUST TURBO BLANKET
Regular Price $94.50Air Tec Turbo blankets are designed to fit most externally waste gated T4 Turbo housings. Manufactured for 2,500°F rated. Durable high temperature outer shell material Easy to install with included securing wire.
-
1.32AR S400/S410/S430 TURBO EXHAUST HOUSING (ATIS4132EH)
Regular Price $250.00This Tru-Flo 1.32 A/R housing is sized for a 96mm x 88mm turbine and is listed for S400, S410, and S430 applications. If you are replacing a worn housing or updating a setup, the option selections on this page let you tailor the build without mixing parts from multiple sources. A/R: 1.32 Turbine sizing shown on-page: 96mm x 88mm Optional ceramic coating selections Optional center cartridge to exhaust housing clamp add-on
