-
T4 12V STEED SPEED ANGLED TURBO FLANGE MANIFOLD
Regular Price $700.00Shown here is T4 manifold with angled flange. The perfect choice for upgrading to a larger turbo for your truck. The manifold comes complete with all gaskets and turbo mounting hardware.
-
STAGE 3 TURBO FOR 07-18 6.7L CUMMINS (HE300VG-R0718-S3)
Regular Price $2,995.00HE351VE Stage 3 Turbo with a 63mm Billet compressor wheel & upgraded 67mm turbine & custom machined CHRA exhaust passage , fits 2007 – 2018 6.7L Cummins Turbo with new style actuator
-
BIG IRON Coolant Pipe BI67CYPIPE2
Regular Price $69.95TWO STAINLESS STEEL Dual Radiator Coolant Y-PipesThese dual radiator coolant y-pipes replaces the plastic coolant y-pipes with Stainless steel pipes in your 2013-2015 6.7L Dodge Ram Cummins. The factory y-pipes on your dual radiator 6.7’s are constructed from fragile plastic and they are prone to premature failure. This causes large coolant leaks, overheating scenarios and, blown head gaskets for your engine. This preventative swap will keep you from getting stranded while also adding a bit of style to your 6.7 Cummins. all-stainless steel construction and a polished finish and corrosion resistance. replaces both your upper and lower connections.Fitment6.7L 2013-2015 Dodge CumminsKit includes2 Stainless steel pipes4 stainless steel clamps -
Banks Power Monster-Ram Turbo Inlet Elbow 17-24 Chevy/GMC 2500/3500 6.6L Duramax L5P Raw (42792-N)
Regular Price $321.11On sale price $289.00The Banks Monster-Ram Turbo Inlet for the 2017-2024 Duramax L5P is the only intake elbow that outperforms stock without the destructive effects of turbo surge. More than a year in development, the Monster-Ram increases air mass flow to the compressor. This results in slower turbo shaft speed and a reduction in time to boost. With slower shaft speeds, throttle response is improved, and turbo life is increased. Duramax L5P Turbo Inlet with Anti-Surge. Red Powder Coat Key Features: 11 percent lower turbo driver pressure Maximum safe performance with no turbo surge 23 percent Greater Gulp Capacity (volume) 17 percent Larger…
-
Banks Power Monster-Ram Intake 13-18 RAM 3500-5500 Chassis Cab 6.7L Raw (42804-N)
Regular Price $1,254.44On sale price $1,129.00The Banks Monster-Ram improves throttle response and fuel economy by eliminating airflow restrictions. By replacing the failure-prone factory grid heater with the included Banks high-flow billet intake plate, severe engine damage is prevented. Monster-Ram is the only 50-state emissions-compliant RAM intake elbow. What it does: The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs./min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock’s 38.6 lbs./min MAF. Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher…
-
Valair Billet Flex Plate 07.5-18 6.7L Dodge/Ram Cummins (FP-68-B)
Regular Price $282.45The Valair Billet Flex Plate will replace the cracked or broken factory flex plate for your 2007.5 – 2018 Dodge / Ram 6.7L Diesel. This flex plate is SFI approved to handle high-power applications and features billet steel construction. Billet Construction SFI Approved Made for high HP applications
-
S&B Cold Air Intake Kit 01-04 Chevrolet Silverado GMC Sierra V8-6.6L LB7 Duramax (75-5101D)
Regular Price $379.00Our LB7 Duramax cold air intake for the 2001-2004 Chevy / GMC Duramax LB7 6.6L was engineered to minimize air restriction and flows 44.63 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited…
-
184/215 Cam 89-18 Dodge/Ram Cummins (MTP184215)
Regular Price $599.00On sale price $598.00Installs with no Modification with proper valve protrusion. Works great for Towing and Performance Must use engine break in oil or zinc additive for the first 1,000 miles Liberally apply engine assembly lube to the entire camshaft before installation Application: 1989-2018 Dodge/Ram Cummins
-
AirDog II-5G, DF-165-5G Air/Fuel Separation System Fuel Pump 04.5-18 Dodge/RAM Cummins (A7SABD526)
Regular Price $881.00This is the AirDog II-5G DF-165-5G fuel system for the 2004.5-2018 Dodge Ram Common Rail Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. A Fuel Module Upgrade Kit is installed in the factory fuel basket to pull fuel through a factory-style 1/2″ bulkhead fitting. This will bypass the factory in-tank lift pump. The pressure side connects directly into the side of the injection pump, bypassing the factory fuel filter housing. The AirDog Air/Vapor return is sent back to the tank through the factory 3/8” suction line once the module is modified.…
-
Edge EAS Replacement EGT LEAD – 15 Inch (98920)
Regular Price $49.95EAS REPLACEMENT 15″ EGT LEAD (only for part number 98620) Compatible w/ Edge CS2/CTS2 and EAS EGT Kit
-
S&B Cold Air Intake Kit 17-19 Ford F250 F350 6.7L Powerstroke (75-5085-1)
Regular Price $379.00Maximum Performance Our cold air intake for the 2017-2019 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 57.30 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Less Restrictive Than Stock We swapped the location of the intake box and battery, allowing our intake to not only be closer to but…
-
S&B Cold Air Intake Kit 13-18 Dodge Ram 2500 3500 6.7L Cummins (75-5068)
Regular Price $379.00Maximum Performance Our cold air intake for the 2013-2018 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 54.60 percent better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. Built In Swing Gate. In extreme heat, high loads, or high altitudes S&B’s swing gate pivots when your truck accelerates to full throttle,…
-
S&B Silicone Body Mount Kit For 08-16 Ford F-250/F-350 Reg/Extend Cab Powerstroke 6.4L/6.7L (81-1002)
Regular Price $399.00Silicone Body Mount Kit For 08-16 Ford F-250/F-350 Powerstroke 6.4L/6.7L Reg/Extend Cab 6 Pc. Made From A Premium Silicone Rubber. These bushings offer great vibration isolation and will not crack or breakdown like the OEM foam or rubber bushings. Also comes with corrosion resistant coated steel cups and bolts. A Smooth Ride That Will Last a Lifetime. Stock body mounts deteriorate over time and cost a fortune. Urethane mounts are hard and squeak. S&B’s Silicone Body Mounts have a smooth stock ride and last the life of your truck. OEM Fit and Finish The cap bushings have a distinct boss…
-
Garrett New Stock Replacement Turbocharger 04.5-10 GM Duramax (848212-5001S)
Regular Price $1,595.00This is the Garrett Stock Replacement Turbo for your 04.5-10 GM Duramax LLY/LBZ/LMM Part# 848212-5001S Fitment: 2004.5-2010 GM Duramax LLY/LBZ/LMM Direct Replacement Condition: New Brand: Garrett Warranty: This Turbocharger also comes with a 1 Year warranty.
-
2019 – 2023 Cummins 6.7L New HE300VG Billet Turbocharger w/ Actuator (HE300VG-R1923-S0)
Regular Price $2,495.00AirTec New HE300VG turbo for 2019 – 2023 6.7L Cummins OEM turbo comes with Genuine Holset HE300 actuator and Billet Compressor wheel
-
HOLSET 2013-2018 6.7L CUMMINS GENUINE HOLSET TURBO
Regular Price $3,295.00HOLSET 2013-2018 6.7L CUMMINS GENUINE HOLSET TURBO This is a Genuine Cummins Holset stock replacement turbocharger for your Dodge Cummins 2013 – 2017 6.7L. This is a direct from Holset OEM VGT Turbocharger.
-
BIHDFP66DMX SFI APPROVED 01 – 16 DURAMAX FLEXPLATE
Regular Price $139.00BIHDFP66DMX SFI APPROVED DURAMAX FLEXPLATE 01-16
-
BIG IRON SFI APPROVED FLEXPLATE FORD POWERSTROKE
Regular Price $139.0012 month warranty for manufacturer defects
-
ATIS3606870B S300 BILLET 60MM TURBO FOR 94 – 02 5.9L CUMMINS
Regular Price $1,475.00S300 TURBO BILLET 60MM COMPRESSOR WHEEL .70 WASTEGATED EXHAUST HOUSING FOR 94 – 02 5.9L CUMMINS POWDER COATED COMPRESSOR COVER
-
ATI60PS067S1 STAGE 1 TURBO FOR 03 – 07 6.0L FORD POWERSTROKE
Regular Price $1,395.00STAGE 1 BILLET 59MM COMPRESSOR WHEEL 66MM TURBINE WHEEL 03 – 07 6.0L POWERSTROKE TURBO POWDER COATED COMPRESSOR COVER
-
ATIHE351CWS2 STAGE 2 TURBO FOR 03-07 5.9L CUMMINS
Regular Price $1,125.00ATI HE351CW Stage 2 ATI Billet 60MM comp wheel and 64mm 10 Blade Turbine wheel & Powder coated compressor cover WILL FIT 2003 – 2004 WITH ITEMS IN SUGGESTED SECTION
-
ATI WASTEGATE DELETE PLUG (ATI351WGADP)
Regular Price $36.00ATI HE351CW Solenoid Delete plug with 1/8 hole for boost elbow
-
ATIHE351CWS1 STAGE 1 TURBO FOR 03 – 07 5.9L CUMMINS
Regular Price $995.00Stage 1 ATI Billet 60MM compressor wheel Part# ATIHE351CWS1 03-07 5.9L CUMMINS WILL FIT 2003 – 2004 WITH ITEMS IN SUGGESTED SECTION
-
-
Valair Cummins Clutch Hydraulic (NMU70HYD-03)
Regular Price $355.26Heavy Duty Adjustable Hydraulic Master / Slave Replacement for 3nd Generation Trucks. 2003+
-
Cummins Input Shaft Kit (1.375K)
Regular Price $275.00-3/8″ Input Shaft Upgrade
Complete upgrade kit for NV4500 with 1-1/4″ Input Shafts. Fully assembled and ready to install. -
Valair Cummins Flywheel (VG56)
Regular Price $298.62G56 6 Speed solid flywheel These are drilled to accept 13.00″ pressure plates only.
Used in our G56 Solid Flywheel Conversions.
NOTE: Only for trucks equipped with Mercedes G56 transmissions -
Valair Cummins Flywheel (V3434)
Regular Price $298.62New 6 Speed Flywheel
Direct Factory Replacement
These are only drilled to accept a 13.00″ pressure plate and require a starter spacer to run in a 5 speed truck. -
Valair Cummins Dual Disc Ceramic Clutch Kit (NMU70NV56DDSN)
Regular Price $1,166.972001 – 2005 NV5600 24V Cummins
Not for Competion Use
Dual Disc Kit – up to 650HP
Ceramic Buttons
Nodular Iron Flywheel and Billet Floater plate
Pressure Plate Load – 3800#
Kit includes: New Nodular Sprung hub NV5600 Dual Disc Flywheel, 3800# Pressure Plate, Ceramic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool. -
Valair Cummins Single Disc Organic Clutches (NMU70279-01)
Regular Price $491.212001 – 2005 NV5600 24V Cummins
This clutch will be more aggressive than stock.
13.00″ x 1.375″ Heavy Duty Organic Replacement
Premium Brass Woven Organic Facings
HD Spring Hub
Rated @ 350HP / 800 ft lbs Torque
3400# Pressure Plate
Kit includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
