fbpx
Air Tec Innovations LLC
0
S&B Cold Air Intake Kit 17-19 Ford F250 F350 6.7L Powerstroke (75-5085-1)
75-5085-1_10-BKJF

S&B Cold Air Intake Kit 17-19 Ford F250 F350 6.7L Powerstroke (75-5085-1)

Regular Price $349.00

75-5085-1 , ,

Maximum Performance Our cold air intake for the 2017-2019 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 57.30 percent better than stock.

This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

Protect Your Engine. This kit comes with a massive, highly efficient air filter which results in better performance and protects your engine.

Available in either 8-layer Cotton Cleanable or Dry Extendable media. Less Restrictive Than Stock We swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a significant decrease in restriction compared to stock intake. Large Clear Lid Our Signature Large Clear Lid provides great looks. Featuring a rubber lid seal to keep out power robbing engine heat.

No More Check Engine Lights S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning.

This kit was designed to avoid check engine lights with its properly mapped Mass Air Flow Sensor. Million Mile Warranty – S&B Air Filters and Intake Kits purchased from Authorized dealers are backed by S&B’s Million Mile Limited Warranty. Only when used under the typical driving conditions and on vehicles or which they were designed. If one of our products is not performing properly or is defective, S&B replace it.

Breathe Easy. Your Engine and warranty are protected – Installing a S&B Intake Kit or Air Filter will not void your vehicles warranty, as long as you properly install and maintain your intake kit or filter.

Details:

  • Fits 17-19 Ford F250 / F350 V8-6.7L Powerstroke
  • Filter Type Oiled
  • Filter Cotton Cleanable
  • Quantity Of Oil 190 Grams
  • Replacement Filter KF-1085
  • Filter Material Cotton Gause
  • Filter Color Red
  • Oil Color Red
  • Color Black
  • Engine Manufacturer Powerstroke
  • Street Legal in All US States Yes
  • CARB Exempt ID D-590-23
  • Fuel Type Diesel
  • Liter 6.7 Liter
  • Cylinder V8
  • Warranty Million Mile Warranty
Weight 15 lbs
Dimensions 24 × 15 × 14 in

Related Products

  •
    Add to cart

    BIG IRON Engine Oil Pan 03-12 5.9L & 6.7L Cummins (BICR5967OP)

    Regular Price $177.00

    Specifications:

    Direct replacement
    Built to strict quality control standard
    Engine Oil Pan for Dodge Ram Pickup Truck for 2003-2012 5.9L 6.7L Cummins Diesel
    NOTE: This pan can also be installed on the 2013 through 2018 Cummins 6.7L engines, but it will require using the 2003 – 2012 style oil sump pipe.

    Add to cart
  • Valair Powerstroke Single Disc Ceramic Clutches (NMU70263-04)
    Add to cart

    Valair Powerstroke Single Disc Ceramic Clutches (NMU70263-04)

    Regular Price $617.27

    1994 – 1997 7.3L 13″ x 1.25″ Performance Replacement
    HD Spring Hub
    Ceramic Button
    Rated @ 600HP / 1100 ft lbs Torque
    3400# Pressure Plate
    Kit includes:3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
    NOTE: Requires V2140 Flywheel

    Add to cart
  • Add to cart

    ATIS46483B S464 T-4 BILLET 64MM Universal Turbo

    Regular Price $1,250.00

    S464 T-4 BILLET 64MM Universal Turbo (ATIS46483B)

    ATI offers a line of T-4 S400 turbos. We can also offer these turbos custom-built for your specifications. They are available with a cast or billet compressor wheel. All ATI turbos have heavy Duty 360 thrust bearings and the compressor inducer machined with a radius for optimum air flow. This is not a direct fit, but you will need an install kit for your application. Let us know if you need assistance with this.

    Specifications:

    *64mm Billet compressor

    *83MM turbine wheel

    *HD 360 degree thrust bearing

    *Twin hydrodynamic journal bearings

    *T4 twin scroll .90 A/R non-wastegated turbine housing

    Add to cart
  • Add to cart

    BIG IRON Engine Oil Pan to fit with main studs 03-12 5.9L & 6.7L Cummins (BICR5967OPMS)

    Regular Price $210.00

    Oil pan for 2003 – 2012 5.9L 6.7L Dodge Cummins Trucks
    This pan is made to fit engines that have main studs and a girdle installed. It has an indention pressed into the back of the oil pan so you don’t need to modify your old pan and take the risk of having oil leaks. We designed this pan with four drain holes thru the nut to allow the pan to have a complete drain.

    The BIG IRON oil pan also has a thicker reinforced lip and it requires the 6.7L oil pan bolts which are longer than the 5.9L bolts.

    Specifications:
    EASY INSTALLATION WITH NO FRUSTRATIONS!
    Direct replacement
    Built to strict quality control standard
    Engine Oil Pan for Dodge Ram Pickup Truck for 2003 – 2012 5.9L 6.7L Cummins Diesel
    NOTE: This pan can also be installed on the 2013 through 2018 Cummins 6.7L engines, but it will require using the 2003 – 2012 style oil sump pipe.

    Add to cart

Start typing and press Enter to search